User Tools

Site Tools

Trace: • thinkgeo.mapsuite.windowsphonecore.writeablebitmapgeocanvas

Sidebar

ThinkGeo Cloud

ThinkGeo UI Controls

ThinkGeo Open Source

Help and Support

External Resources

thinkgeo.mapsuite.windowsphonecore.writeablebitmapgeocanvas

Table of Contents

ThinkGeo.MapSuite.WindowsPhoneCore.WriteableBitmapGeoCanvas

Note: The page was created before Map Suite 10. Map Suite 10.0 organized many classes into new namespaces and assemblies as well as had a few minor breaks in compatibility. The majority of previously built code should work without modification assuming the new namespaces are added. For guidance on upgrading your existing code, please check out MapSuite 10 Upgrade Guide.

<!– Class –>

Inheritance Hierarchy

*System.Object ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas *ThinkGeo.MapSuite.WindowsPhoneCore.WriteableBitmapGeoCanvas

Members Summary

Public Constructors

Name Parameters DeclaringType Summary
Public MethodWriteableBitmapGeoCanvas

Protected Constructors

Name Parameters DeclaringType Summary

Public Methods

Name Parameters DeclaringType Summary
Public MethodBeginDrawing Object, RectangleShape, GeographyUnit GeoCanvas This method begins the act of drawing on the GeoCanvas.
Public MethodClear GeoBrush GeoCanvas This method clears the current GeoCanvas using the color specified.
Public MethodDrawArea AreaBaseShape, GeoPen, DrawingLevel GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea Feature, GeoPen, DrawingLevel GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea IEnumerable<ScreenPoint［］>, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea AreaBaseShape, GeoPen, GeoBrush, DrawingLevel GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea AreaBaseShape, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea Feature, GeoPen, GeoBrush, DrawingLevel GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea Feature, GeoBrush, DrawingLevel GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea AreaBaseShape, GeoBrush, DrawingLevel GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawArea Feature, GeoPen, GeoBrush, DrawingLevel, Double, Double, PenBrushDrawingOrder GeoCanvas This method draws an area on the GeoCanvas.
Public MethodDrawEllipse Feature, Single, Single, GeoPen, GeoBrush, DrawingLevel GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse PointBaseShape, Single, Single, GeoPen, GeoBrush, DrawingLevel GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse PointBaseShape, Single, Single, GeoBrush, DrawingLevel GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse Feature, Single, Single, GeoPen, DrawingLevel GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse PointBaseShape, Single, Single, GeoPen, DrawingLevel GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse Feature, Single, Single, GeoBrush, DrawingLevel GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse ScreenPoint, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse PointBaseShape, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawEllipse Feature, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder GeoCanvas Draws a point on the GeoCanvas.
Public MethodDrawLine LineBaseShape, GeoPen, DrawingLevel, Single, Single GeoCanvas Draws a line on the GeoCanvas.
Public MethodDrawLine Feature, GeoPen, DrawingLevel, Single, Single GeoCanvas Draws a line on the GeoCanvas.
Public MethodDrawLine IEnumerable<ScreenPoint>, GeoPen, DrawingLevel, Single, Single GeoCanvas Draws the LineShape on the GeoCanvas.
Public MethodDrawLine Feature, GeoPen, DrawingLevel GeoCanvas Draws a line on the GeoCanvas.
Public MethodDrawLine LineBaseShape, GeoPen, DrawingLevel GeoCanvas Draws a line on the GeoCanvas.
Public MethodDrawScreenImage GeoImage, Single, Single, Single, Single, DrawingLevel, Single, Single, Single GeoCanvas Draws a screen image on the GeoCanvas.
Public MethodDrawScreenImageWithoutScaling GeoImage, Single, Single, DrawingLevel, Single, Single, Single GeoCanvas Draws an unscaled image on the GeoCanvas.
Public MethodDrawText String, GeoFont, GeoBrush, GeoPen, IEnumerable<ScreenPoint>, DrawingLevel, Single, Single, Single GeoCanvas This method allows you to draw text at the specified location, using the specified brush and font parameters.
Public MethodDrawText String, GeoFont, GeoBrush, IEnumerable<ScreenPoint>, DrawingLevel GeoCanvas This method allows you to draw text at the specified location, using the specified brush and font parameters.
Public MethodDrawTextWithScreenCoordinate String, GeoFont, GeoBrush, Single, Single, DrawingLevel GeoCanvas This method allows you to draw text at the specified location, using the specified brush and font parameters.
Public MethodDrawTextWithWorldCoordinate String, GeoFont, GeoBrush, Double, Double, DrawingLevel GeoCanvas This method allows you to draw text at the specified location, using the specified brush and font parameters.
Public MethodDrawWorldImage GeoImage, Double, Double, Single, Single, DrawingLevel GeoCanvas Draws a scaled image on the GeoCanvas.
Public MethodDrawWorldImage GeoImage, Double, Double, Double, DrawingLevel, Single, Single, Single GeoCanvas Draws a world image on the GeoCanvas.
Public MethodDrawWorldImage GeoImage, Double, Double, Single, Single, DrawingLevel, Single, Single, Single GeoCanvas Draws a world image on the GeoCanvas.
Public MethodDrawWorldImageWithoutScaling GeoImage, Double, Double, DrawingLevel, Single, Single, Single GeoCanvas Draws an unscaled image on the GeoCanvas.
Public MethodDrawWorldImageWithoutScaling GeoImage, Double, Double, DrawingLevel GeoCanvas Draws an unscaled image on the GeoCanvas.
Public MethodEndDrawing GeoCanvas This method ends drawing and commits the drawing on the GeoCanvas.
Public MethodEquals Object Object
Public MethodFlush GeoCanvas This method flush drawing and commits the drawing on the GeoCanvas.
Public MethodGetHashCode Object
Public MethodGetStreamFromGeoImage GeoImage GeoCanvas(overriden)
Public MethodGetType Object
Public MethodMeasureText String, GeoFont GeoCanvas This method returns the rectangle that contains the specified text, when that text is drawn with the specified font.
Public MethodToGeoImage Object GeoCanvas This method converts an oboject to a GeoImage. In GdiPlus, this object is often a Bitmap.
Public MethodToNativeImage GeoImage GeoCanvas This method converts a GeoImage to a commonly-used object. In GdiPlus, this object is often a Bitmap.
Public MethodToString Object

Protected Methods

Name Parameters DeclaringType Summary
Protected MethodBeginDrawingCore Object, RectangleShape, GeographyUnit GeoCanvas(overriden)
Protected MethodClearCore GeoBrush GeoCanvas This method clears the current GeoCanvas using the color specified.
Protected MethodDrawAreaCore IEnumerable<ScreenPoint［］>, GeoPen, GeoBrush, DrawingLevel, Double, Double, PenBrushDrawingOrder GeoCanvas(overriden)
Protected MethodDrawEllipseCore ScreenPoint, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder GeoCanvas(overriden)
Protected MethodDrawLineCore IEnumerable<ScreenPoint>, GeoPen, DrawingLevel, Single, Single GeoCanvas(overriden)
Protected MethodDrawScreenImageCore GeoImage, Single, Single, Single, Single, DrawingLevel, Single, Single, Single GeoCanvas(overriden)
Protected MethodDrawScreenImageWithoutScalingCore GeoImage, Single, Single, DrawingLevel, Single, Single, Single GeoCanvas(overriden)
Protected MethodDrawTextCore String, GeoFont, GeoBrush, GeoPen, IEnumerable<ScreenPoint>, DrawingLevel, Single, Single, Single GeoCanvas(overriden)
Protected MethodEndDrawingCore GeoCanvas(overriden)
Protected MethodFinalize Object
Protected MethodFlushCore GeoCanvas(overriden)
Protected MethodGetCanvasHeight Object GeoCanvas This method gets the canvas height of the passed-in native image object.
Protected MethodGetCanvasHeightCore Object GeoCanvas(overriden)
Protected MethodGetCanvasWidth Object GeoCanvas This method gets the canvas width of the passed-in native image object.
Protected MethodGetCanvasWidthCore Object GeoCanvas(overriden)
Protected MethodMeasureTextCore String, GeoFont GeoCanvas(overriden)
Protected MethodMemberwiseClone Object
Protected MethodOnDrawingProgressChanged DrawingProgressChangedEventArgs GeoCanvas
Protected MethodToGeoImageCore Object GeoCanvas(overriden)
Protected MethodToNativeImageCore GeoImage GeoCanvas(overriden)

Public Properties

Name Return DeclaringType Summary
Public PropertyCurrentWorldExtent RectangleShape GeoCanvas This property gets the adjusted current extent based on what was set when BeginDrawing was called.
Public PropertyDpi Single GeoCanvas
Public PropertyHeight Double GeoCanvas This property gets the height of the canvas.
Public PropertyIsDrawing Boolean GeoCanvas This property gets the drawing status of the GeoCanvas.
Public PropertyMapUnit GeographyUnit GeoCanvas This property returns the MapUnit passed in on the BeginDrawingAPI in the GeoCanvas.
Public PropertyNativeImage Object GeoCanvas The same reference to the parameter 'nativeImage' in BeginDrawing function.
Public PropertyWidth Double GeoCanvas This property gets the width of the canvas.

Protected Properties

Name Return DeclaringType Summary

Public Events

Name Event Arguments DeclaringType Summary
Public EventDrawingProgressChanged DrawingProgressChangedEventArgs GeoCanvas

Public Constructors

WriteableBitmapGeoCanvas()

Parameters

Name Type Description

Go Back

Protected Constructors

Public Methods

BeginDrawing(Object, RectangleShape, GeographyUnit)

This method begins the act of drawing on the GeoCanvas.

Remarks

This is the first method that needs to be called before any drawing takes place. Calling this method will set the IsDrawing property to true. When you finish drawing, you must call EndDrawing to commit the changes to the image.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
nativeImage Object<!– System.Object –> This parameter represents the image you want the GeoCanvas to draw on.
worldExtent RectangleShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.RectangleShape –> This parameter is the world extent of the canvasImage.
drawingMapUnit GeographyUnit<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeographyUnit –> This parameter is the map unit of the canvasImage.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

Clear(GeoBrush)

This method clears the current GeoCanvas using the color specified.

Remarks

Use this method to clear the GeoCanvas.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(AreaBaseShape, GeoPen, DrawingLevel)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape AreaBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.AreaBaseShape –> This parameter is the area shape.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the area.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(Feature, GeoPen, DrawingLevel)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the area feature.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the area.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(IEnumerable<ScreenPoint［］>, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
screenPoints IEnumerable<ScreenPoint［］><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPointthinkgeo.mapsuite.windowsphonecore.writeablebitmapgeocanvas} –> This parameter is the AreaShape in well-known binary format.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the AreaShape.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the feature to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the feature to be drawn.
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –> This parameter determines the PenBrushDrawingOrder used when drawing the area type feature.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(AreaBaseShape, GeoPen, GeoBrush, DrawingLevel)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
shape AreaBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.AreaBaseShape –> This parameter is the area shape to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline pen that will be used to draw the AreaShape.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill Brush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(AreaBaseShape, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
shape AreaBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.AreaBaseShape –> This parameter is the area shape to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the AreaShape.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the feature to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the feature to be drawn.
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –> This parameter determines the PenBrushDrawingOrder used when drawing the area type feature.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(Feature, GeoPen, GeoBrush, DrawingLevel)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the AreaFeature to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the AreaShape.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(Feature, GeoBrush, DrawingLevel)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the AreaShape in well-known binary format.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(AreaBaseShape, GeoBrush, DrawingLevel)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
shape AreaBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.AreaBaseShape –> This parameter is the area shape to be drawn.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill Brush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawArea(Feature, GeoPen, GeoBrush, DrawingLevel, Double, Double, PenBrushDrawingOrder)

This method draws an area on the GeoCanvas.

Remarks

This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –> This method is used to draw on the GeoCanvas. It provides you with a number of overloads that allow you to control how things are drawn. Specify the GeoBrush to fill in an area. Specify the GeoPen to outline an area using that GeoPen. You can also call an overload that will allow you to specify both a GeoPen and a GeoBrush.The DrawingLevel allows you to specify the level you will draw on when you are drawing multiple areas. This is very useful when you want to draw a drop shadow, for example. In that case, you could draw the black backdrop on the lowest level with an offset, then draw the normal shape on a higher level without an offset.

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the AreaFeature to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the AreaShape.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the AreaShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.
xOffset Double<!– System.Double –> This parameter determines the X offset for the feature that will be drawn.
yOffset Double<!– System.Double –> This parameter determines the Y offset for the feature that will be drawn.
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –> This parameter determines the PenBrushingDrawingOrder used when drawing the area type feature.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(Feature, Single, Single, GeoPen, GeoBrush, DrawingLevel)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the center point feature.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen or GeoBrush will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(PointBaseShape, Single, Single, GeoPen, GeoBrush, DrawingLevel)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape PointBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.PointBaseShape –> This parameter is the center point shape.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen or GeoBrush will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(PointBaseShape, Single, Single, GeoBrush, DrawingLevel)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape PointBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.PointBaseShape –> This parameter is the center point shape.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the the GeoBrush will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(Feature, Single, Single, GeoPen, DrawingLevel)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the center point feature.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(PointBaseShape, Single, Single, GeoPen, DrawingLevel)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape PointBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.PointBaseShape –> This parameter is the center point shape.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(Feature, Single, Single, GeoBrush, DrawingLevel)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
centerPointFeature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the center point feature.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the the GeoBrush will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(ScreenPoint, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
screenPoint ScreenPoint<!– ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint –> This parameter is the center point in screen coordinate.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen or GeoBrush will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the ellipse to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the ellipse to be drawn.
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(PointBaseShape, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape PointBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.PointBaseShape –> This parameter is the center point shape.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen or GeoBrush will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the ellipse to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the ellipse to be drawn.
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –> This parameter determines the PenBrushDrawingOrder used when drawing the ellipse.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawEllipse(Feature, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder)

Draws a point on the GeoCanvas.

Remarks

This method is used to draw a point on the GeoCanvas. It provides you with a number of overloads that allow you to control how it is drawn. Specify the GeoBrush to fill in the area of the point. Specify the GeoPen to outline the point using that GeoPen. You can also call a overload that will allow you to specify both a GeoPen and a GeoBrush.

The DrawingLevel allows you to specify the level you will draw on when drawing many points.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the center point feature.
width Single<!– System.Single –> This parameter describes the width of the ellipse to be drawn.
height Single<!– System.Single –> This parameter describes the height of the ellipse to be drawn.
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the outline GeoPen that will be used to draw the point.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter describes the fill GeoBrush that will be used to draw the point.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen or GeoBrush will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the ellipse to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the ellipse to be drawn.
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –> This parameter determines the PenBrushDrawingOrder used when drawing the ellipse.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawLine(LineBaseShape, GeoPen, DrawingLevel, Single, Single)

Draws a line on the GeoCanvas.

Remarks

This method is used to draw a line on the GeoCanvas using the specified GeoPen.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple lines. This is very useful when you want to draw a road, for example. You can draw the black background on the lowest level, then draw a slightly thinner white line on a higher level. This will result in a great effect for a road.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape LineBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.LineBaseShape –> This parameter is the line shape to be drawn by GeoCannvas.
linePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the GeoPen that will be used to draw the line.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the feature to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the feature to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawLine(Feature, GeoPen, DrawingLevel, Single, Single)

Draws a line on the GeoCanvas.

Remarks

This method is used to draw a line on the GeoCanvas using the specified GeoPen.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple lines. This is very useful when you want to draw a road, for example. You can draw the black background on the lowest level, then draw a slightly thinner white line on a higher level. This will result in a great effect for a road.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the line feature to be drawn by GeoCannvas.
linePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the GeoPen that will be used to draw the line.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the feature to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the feature to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawLine(IEnumerable<ScreenPoint>, GeoPen, DrawingLevel, Single, Single)

Draws the LineShape on the GeoCanvas.

Remarks

This method is used to draw a line on the GeoCanvas using the specified GeoPen.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple lines. This is very useful when you want to draw a road, for example. You can draw the black background on the lowest level, then draw a slightly thinner white line on a higher level. This will result in a great effect for a road.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
screenPoints IEnumerable<ScreenPoint><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint} –> This parameter is the LineShape in well-known binary format.
linePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the GeoPen that will be used to draw the LineShape.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the feature to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the feature to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawLine(Feature, GeoPen, DrawingLevel)

Draws a line on the GeoCanvas.

Remarks

This method is used to draw a line on the GeoCanvas using the specified GeoPen.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple lines. This is very useful when you want to draw a road, for example. You can draw the black background on the lowest level, then draw a slightly thinner white line on a higher level. This will result in a great effect for a road.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
feature Feature<!– ThinkGeo.MapSuite.WindowsPhoneCore.Feature –> This parameter is the line feature.
linePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the GeoPen that will be used to draw the line.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawLine(LineBaseShape, GeoPen, DrawingLevel)

Draws a line on the GeoCanvas.

Remarks

This method is used to draw a line on the GeoCanvas using the specified GeoPen.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple lines. This is very useful when you want to draw a road, for example. You can draw the black background on the lowest level, then draw a slightly thinner white line on a higher level. This will result in a great effect for a road.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
shape LineBaseShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.LineBaseShape –> This parameter is the line shape to be drawn by GeoCannvas.
linePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter describes the GeoPen that will be used to draw the line.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel that the GeoPen will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawScreenImage(GeoImage, Single, Single, Single, Single, DrawingLevel, Single, Single, Single)

Draws a screen image on the GeoCanvas.

Remarks

Drawing an image scaled is slower than using the API that draws it unscaled.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw.
centerXInScreen Single<!– System.Single –> The X coordinate of the center point (in screen coordinates) of where you want to draw the image.
centerYInScreen Single<!– System.Single –> The Y coordinate of the center point (in screen coordinates) of where you want to draw the image.
widthInScreen Single<!– System.Single –> The width you want to scale the image to. This is the width of the image that will be drawn.
heightInScreen Single<!– System.Single –> The height you want to scale the image to. This is the height of the image that will be drawn.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the image to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the image to be drawn.
rotateAngle Single<!– System.Single –> This parameter determines the rotation angle for the image to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawScreenImageWithoutScaling(GeoImage, Single, Single, DrawingLevel, Single, Single, Single)

Draws an unscaled image on the GeoCanvas.

Remarks

Drawing an image unscaled is faster than using the API that scales it.

The X &amp; Y in work coordinates is where the center of the image will be drawn.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw unscaled.
centerXInScreen Single<!– System.Single –> The X coordinate of the center point (in screen coordinates) of where you want to draw the image.
centerYInScreen Single<!– System.Single –> The Y coordinate of the center point (in screen coordinates) of where you want to draw the image.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the image to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the image to be drawn.
rotateAngle Single<!– System.Single –> This parameter determines the rotation angle for the image to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawText(String, GeoFont, GeoBrush, GeoPen, IEnumerable<ScreenPoint>, DrawingLevel, Single, Single, Single)

This method allows you to draw text at the specified location, using the specified brush and font parameters.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
text String<!– System.String –> This parameter specifies the text you wish to draw.
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –> This parameter represents the font you wish to use to draw the text.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter specifies the kind of fill you want to use to draw the text.
haloPen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –> This parameter specifies the HaloPen that will be used to draw the text, when the HaloPen effect is needed.
textPathInScreen IEnumerable<ScreenPoint><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint} –> This parameter specifies the path on which to draw the text.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter specifies the drawing level you wish to draw the text on. Higher levels overwrite lower levels.
xOffset Single<!– System.Single –> This parameter determines the X offset for the text to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the text to be drawn.
rotateAngle Single<!– System.Single –> This parameter determines the rotation angle for the text to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawText(String, GeoFont, GeoBrush, IEnumerable<ScreenPoint>, DrawingLevel)

This method allows you to draw text at the specified location, using the specified brush and font parameters.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
text String<!– System.String –> This parameter specifies the text you wish to draw.
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –> This parameter represents the font you wish to use to draw the text.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter specifies the kind of fill you want to use to draw the text.
textPathInScreen IEnumerable<ScreenPoint><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint} –> This parameter specifies the path on which to draw the text.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter specifies the drawing level you wish to draw the text on. Higher levels overwrite lower levels.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawTextWithScreenCoordinate(String, GeoFont, GeoBrush, Single, Single, DrawingLevel)

This method allows you to draw text at the specified location, using the specified brush and font parameters.

Remarks

This method is used to draw text on the GeoCanvas at specific screen coordinates. It provides you with a number of overloads that allow you to control how the text is drawn. This is useful especially when adding things such as legends, titles, etc.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple text items. This is very useful when you want to draw a drop shadow, for example. You can draw the black backdrop on the lowest level with an offset, then draw the normal text on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
text String<!– System.String –> This parameter specifies the text you wish to draw.
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –> This parameter represents the font you wish to use to draw the text.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter specifies the kind of fill you want to use to draw the text.
upperLeftXInScreen Single<!– System.Single –> This parameter is the upper left horizontal point in screen coordinates of where you want to start drawing the text from.
upperLeftYInScreen Single<!– System.Single –> This parameter is the upper left vertical point in screen coordinates of where you want to start drawing the text from.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter specifies the drawing level you wish to draw the text on. Higher levels overwrite lower levels.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawTextWithWorldCoordinate(String, GeoFont, GeoBrush, Double, Double, DrawingLevel)

This method allows you to draw text at the specified location, using the specified brush and font parameters.

Remarks

This method is used to draw text on the GeoCanvas at specific screen coordinates. It provides you with a number of overloads that allow you to control how the text is drawn. This is useful especially when adding things such as legends, titles, etc.

The DrawingLevel allows you to specify the level you will draw on when drawing multiple text items. This is very useful when you want to draw a drop shadow, for example. You can draw the black backdrop on the lowest level with an offset, then draw the normal text on a higher level without an offset.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
text String<!– System.String –> This parameter specifies the text you wish to draw.
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –> This parameter represents the font you wish to use to draw the text.
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter specifies the kind of fill you want to use to draw the text.
upperLeftXInWorld Double<!– System.Double –> This parameter is the upper left horizontal point in world coordinates of where you want to start drawing the text from.
upperLeftYInWorld Double<!– System.Double –> This parameter is the upper left horizontal point in world coordinates of where you want to start drawing the text from.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter specifies the drawing level you wish to draw the text on. Higher levels overwrite lower levels.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawWorldImage(GeoImage, Double, Double, Single, Single, DrawingLevel)

Draws a scaled image on the GeoCanvas.

Remarks

Drawing an image scaled is slower than using the API that draws it unscaled.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw.
centerXInWorld Double<!– System.Double –> The X coordinate of the center point of where you want to draw the image.
centerYInWorld Double<!– System.Double –> The Y coordinate of the center point of where you want to draw the image.
widthInScreen Single<!– System.Single –> The width you want to scale the image to. This is the width of the image that will be drawn.
heightInScreen Single<!– System.Single –> The height you want to scale the image to. This is the height of the image that will be drawn.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawWorldImage(GeoImage, Double, Double, Double, DrawingLevel, Single, Single, Single)

Draws a world image on the GeoCanvas.

Remarks

Drawing an image scaled is slower than using the API that draws it unscaled.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw.
centerXInWorld Double<!– System.Double –> The X coordinate of the center point of where you want to draw the image.
centerYInWorld Double<!– System.Double –> The Y coordinate of the center point of where you want to draw the image.
imageScale Double<!– System.Double –> The scale at which you want to draw the image. The final width and height will be caculated based on the scale.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the image to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the image to be drawn.
rotateAngle Single<!– System.Single –> This parameter determines the rotation angle for the image to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawWorldImage(GeoImage, Double, Double, Single, Single, DrawingLevel, Single, Single, Single)

Draws a world image on the GeoCanvas.

Remarks

Drawing an image scaled is slower than using the API that draws it unscaled.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw.
centerXInWorld Double<!– System.Double –> The X coordinate of the center point of where you want to draw the image.
centerYInWorld Double<!– System.Double –> The Y coordinate of the center point of where you want to draw the image.
widthInScreen Single<!– System.Single –> The width you want to scale the image to. This is the width of the image that will be drawn.
heightInScreen Single<!– System.Single –> The height you want to scale the image to. This is the height of the image that will be drawn.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the image to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the image to be drawn.
rotateAngle Single<!– System.Single –> This parameter determines the rotation angle for the image to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawWorldImageWithoutScaling(GeoImage, Double, Double, DrawingLevel, Single, Single, Single)

Draws an unscaled image on the GeoCanvas.

Remarks

Drawing an image unscaled is faster than using the API that scales it.

The X &amp; Y in work coordinates is where the center of the image will be drawn.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw unscaled.
centerXInWorld Double<!– System.Double –> The X coordinate of the center point (in world coordinates) of where you want to draw the image.
centerYInWorld Double<!– System.Double –> The Y coordinate of the center point (in world coordinates) of where you want to draw the image.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.
xOffset Single<!– System.Single –> This parameter determines the X offset for the image to be drawn.
yOffset Single<!– System.Single –> This parameter determines the Y offset for the image to be drawn.
rotateAngle Single<!– System.Single –> This parameter determines the rotation angle for the image to be drawn.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawWorldImageWithoutScaling(GeoImage, Double, Double, DrawingLevel)

Draws an unscaled image on the GeoCanvas.

Remarks

Drawing an image unscaled is faster than using the API that scales it.

The X &amp; Y in work coordinates is where the center of the image will be drawn.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The image you want to draw unscaled.
centerXInWorld Double<!– System.Double –> The X coordinate of the center point of where you want to draw the image.
centerYInWorld Double<!– System.Double –> The Y coordinate of the center point of where you want to draw the image.
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –> This parameter determines the DrawingLevel the image will draw on.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

EndDrawing()

This method ends drawing and commits the drawing on the GeoCanvas.

Remarks

This method should be called when you are finished drawing. It will commit the image changes to the image you passed in on BeginDrawing. It will also set IsDrawing to false. After you call this method it will put the GeoCanvas into an invalid state, so if you then call any drawing methods it will raise an exception.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

Equals(Object)

Return Value

Return Type Description
Boolean<!– System.Boolean –>

Parameters

Name Type Description
obj Object<!– System.Object –>

<!– System.Object –> Go Back

Flush()

This method flush drawing and commits the drawing on the GeoCanvas.

Remarks

This method should be called when you are finished drawing. It will commit the image changes to the image you passed in on BeginDrawing. It will also set IsDrawing to false. After you call this method it will put the GeoCanvas into an invalid state, so if you then call any drawing methods it will raise an exception.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

GetHashCode()

Return Value

Return Type Description
Int32<!– System.Int32 –>

Parameters

Name Type Description

<!– System.Object –> Go Back

GetStreamFromGeoImage(GeoImage)

Return Value

Return Type Description
Stream<!– System.IO.Stream –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

GetType()

Return Value

Return Type Description
Type<!– System.Type –>

Parameters

Name Type Description

<!– System.Object –> Go Back

MeasureText(String, GeoFont)

This method returns the rectangle that contains the specified text, when that text is drawn with the specified font.

Remarks

This method is typically used for labeling, to determine whether labels overlap.

Return Value

Return Type Description
DrawingRectangleF<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingRectangleF –> This method returns the rectangle that contains the specified text, when that text is drawn with the specified font.

Parameters

Name Type Description
text String<!– System.String –> This parameter represents the text you want to measure.
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –> This parameter represents the font of the text you want to measure.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

ToGeoImage(Object)

This method converts an oboject to a GeoImage. In GdiPlus, this object is often a Bitmap.

Remarks

This method is a BaseClass API and will be implemented and used in its sub-concrete classes.

Return Value

Return Type Description
GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The returning GeoImage containing the same information as the passed-in nativeImage.

Parameters

Name Type Description
nativeImage Object<!– System.Object –> The target object to be converted.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

ToNativeImage(GeoImage)

This method converts a GeoImage to a commonly-used object. In GdiPlus, this object is often a Bitmap.

Remarks

This method is a BaseClass API and will be implemented and used in its sub-concrete classes.

Return Value

Return Type Description
Object<!– System.Object –> The returning object containing the same information as the passed-in geoImage.

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –> The target geoImage to convert.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

ToString()

Return Value

Return Type Description
String<!– System.String –>

Parameters

Name Type Description

<!– System.Object –> Go Back

Protected Methods

BeginDrawingCore(Object, RectangleShape, GeographyUnit)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
bitmap Object<!– System.Object –>
worldExtent RectangleShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.RectangleShape –>
drawingMapUnit GeographyUnit<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeographyUnit –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

ClearCore(GeoBrush)

This method clears the current GeoCanvas using the color specified.

Remarks

Use this method to clear the GeoCanvas.

This method is designed to be overridden by the deriving class.

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –> This parameter specifies the the brush that will be used to clear the GeoCanvas.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

DrawAreaCore(IEnumerable<ScreenPoint［］>, GeoPen, GeoBrush, DrawingLevel, Double, Double, PenBrushDrawingOrder)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
screenPoints IEnumerable<ScreenPoint［］><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPointthinkgeo.mapsuite.windowsphonecore.writeablebitmapgeocanvas} –>
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –>
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –>
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –>
xOffset Double<!– System.Double –>
yOffset Double<!– System.Double –>
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

DrawEllipseCore(ScreenPoint, Single, Single, GeoPen, GeoBrush, DrawingLevel, Single, Single, PenBrushDrawingOrder)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
screenPoint ScreenPoint<!– ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint –>
width Single<!– System.Single –>
height Single<!– System.Single –>
outlinePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –>
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –>
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –>
xOffset Single<!– System.Single –>
yOffset Single<!– System.Single –>
penBrushDrawingOrder PenBrushDrawingOrder<!– ThinkGeo.MapSuite.WindowsPhoneCore.PenBrushDrawingOrder –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

DrawLineCore(IEnumerable<ScreenPoint>, GeoPen, DrawingLevel, Single, Single)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
screenPoints IEnumerable<ScreenPoint><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint} –>
linePen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –>
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –>
xOffset Single<!– System.Single –>
yOffset Single<!– System.Single –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

DrawScreenImageCore(GeoImage, Single, Single, Single, Single, DrawingLevel, Single, Single, Single)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –>
centerXInScreen Single<!– System.Single –>
centerYInScreen Single<!– System.Single –>
widthInScreen Single<!– System.Single –>
heightInScreen Single<!– System.Single –>
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –>
xOffset Single<!– System.Single –>
yOffset Single<!– System.Single –>
rotateAngle Single<!– System.Single –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

DrawScreenImageWithoutScalingCore(GeoImage, Single, Single, DrawingLevel, Single, Single, Single)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –>
centerXInScreen Single<!– System.Single –>
centerYInScreen Single<!– System.Single –>
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –>
xOffset Single<!– System.Single –>
yOffset Single<!– System.Single –>
rotateAngle Single<!– System.Single –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

DrawTextCore(String, GeoFont, GeoBrush, GeoPen, IEnumerable<ScreenPoint>, DrawingLevel, Single, Single, Single)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
text String<!– System.String –>
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –>
fillBrush GeoBrush<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoBrush –>
haloPen GeoPen<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoPen –>
textPathInScreen IEnumerable<ScreenPoint><!– System.Collections.Generic.IEnumerable{ThinkGeo.MapSuite.WindowsPhoneCore.ScreenPoint} –>
drawingLevel DrawingLevel<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingLevel –>
xOffset Single<!– System.Single –>
yOffset Single<!– System.Single –>
rotateAngle Single<!– System.Single –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

EndDrawingCore()

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

Finalize()

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description

<!– System.Object –> Go Back

FlushCore()

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

GetCanvasHeight(Object)

This method gets the canvas height of the passed-in native image object.

Remarks

This method is a BaseClass API and will be implemented and used in its sub-concrete classes.

Return Value

Return Type Description
Double<!– System.Double –> The returning canvas height.

Parameters

Name Type Description
nativeImage Object<!– System.Object –> The native image that will be used to get the image height.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

GetCanvasHeightCore(Object)

Return Value

Return Type Description
Double<!– System.Double –>

Parameters

Name Type Description
nativeImage Object<!– System.Object –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

GetCanvasWidth(Object)

This method gets the canvas width of the passed-in native image object.

Remarks

This method is a BaseClass API and will be implemented and used in its sub-concrete classes.

Return Value

Return Type Description
Double<!– System.Double –> The returning canvas width.

Parameters

Name Type Description
nativeImage Object<!– System.Object –> The native image that will be used to get the image width.

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

GetCanvasWidthCore(Object)

Return Value

Return Type Description
Double<!– System.Double –>

Parameters

Name Type Description
nativeImage Object<!– System.Object –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

MeasureTextCore(String, GeoFont)

Return Value

Return Type Description
DrawingRectangleF<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingRectangleF –>

Parameters

Name Type Description
text String<!– System.String –>
font GeoFont<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoFont –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

MemberwiseClone()

Return Value

Return Type Description
Object<!– System.Object –>

Parameters

Name Type Description

<!– System.Object –> Go Back

OnDrawingProgressChanged(DrawingProgressChangedEventArgs)

Return Value

Return Type Description
Void<!– System.Void –>

Parameters

Name Type Description
e DrawingProgressChangedEventArgs<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingProgressChangedEventArgs –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

ToGeoImageCore(Object)

Return Value

Return Type Description
GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –>

Parameters

Name Type Description
nativeImage Object<!– System.Object –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

ToNativeImageCore(GeoImage)

Return Value

Return Type Description
Object<!– System.Object –>

Parameters

Name Type Description
image GeoImage<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoImage –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas(overriden) –> Go Back

Public Properties

CurrentWorldExtent

This property gets the adjusted current extent based on what was set when BeginDrawing was called.

Remarks

The extent that gets passed in on BeginDrawing is adjusted for the height and width of the physical media being drawn on. For example if the current extent is wider than taller but the bitmap being drawn on is square then the current extent needs to be adjusted. The extent will be adjusted larger so that we ensure that the entire original extent will still be represented.

Return Value

Return Type
RectangleShape<!– ThinkGeo.MapSuite.WindowsPhoneCore.RectangleShape –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

Dpi

Return Value

Return Type
Single<!– System.Single –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

Height

This property gets the height of the canvas.

Remarks

This property reflects the height of the canvas image that was passed in on BeginDrawing.

Return Value

Return Type
Double<!– System.Double –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

IsDrawing

This property gets the drawing status of the GeoCanvas.

Remarks

This property is set to true when the BeginDrawing method is called, and false after the EndDrawing method is called.

Return Value

Return Type
Boolean<!– System.Boolean –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

MapUnit

This property returns the MapUnit passed in on the BeginDrawingAPI in the GeoCanvas.

Return Value

Return Type
GeographyUnit<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeographyUnit –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

NativeImage

The same reference to the parameter 'nativeImage' in BeginDrawing function.

Return Value

Return Type
Object<!– System.Object –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

Width

This property gets the width of the canvas.

Remarks

This property reflects the width of the canvas image that was passed in on BeginDrawing.

Return Value

Return Type
Double<!– System.Double –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

Protected Properties

Public Events

DrawingProgressChanged

Event Arguments

Event Arguments
DrawingProgressChangedEventArgs<!– ThinkGeo.MapSuite.WindowsPhoneCore.DrawingProgressChangedEventArgs –>

<!– ThinkGeo.MapSuite.WindowsPhoneCore.GeoCanvas –> Go Back

NOTOC WindowsPhoneMapSuiteCore ThinkGeo.MapSuite.WindowsPhoneCore UpdateDocumentation

thinkgeo.mapsuite.windowsphonecore.writeablebitmapgeocanvas.txt · Last modified: 2017/03/16 21:59 (external edit)

Page Tools