User Tools

Site Tools


sanav_gc-101_configuration

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sanav_gc-101_configuration [2015/09/17 01:58]
admin
sanav_gc-101_configuration [2015/09/17 01:59] (current)
admin
Line 1: Line 1:
-====== ​SANAV_GC-101_Configuration ​======+====== ​SANAV GC-101 Configuration ​======
  
 The SANAV GC-101 is a portable device that allows for configuration via SMS-text messages. The SANAV GC-101 is a portable device that allows for configuration via SMS-text messages.
Line 6: Line 6:
 \\ \\
  
-  -**Do you have all the elements in place to successfully connect your device to the GPS Tracking Server?**<br/>Check the Tracking Device Connection Guide before configuring your device: [[Tracking Device Connection Guide| Tracking Device Connection Guide]]+  -**Do you have all the elements in place to successfully connect your device to the GPS Tracking Server?** 
 +\\ 
 +Check the Tracking Device Connection Guide before configuring your device: [[Tracking Device Connection Guide| Tracking Device Connection Guide]]
   -**Install SIM Card**   -**Install SIM Card**
     - Remove back cover of the device and remove the battery. This should expose the IMEI number of the tracking device.     - Remove back cover of the device and remove the battery. This should expose the IMEI number of the tracking device.
Line 18: Line 20:
   -**Configure Tracking Device**   -**Configure Tracking Device**
     - On your text enabled cellphone compose a text message to the phone number of the SIM card installed in your tracking device.     - On your text enabled cellphone compose a text message to the phone number of the SIM card installed in your tracking device.
-    - Send the following commands each in their own text message. If the device successfully received the command it will respond back. <​br/> ​The default username is **username**.<​br/> ​The default password is **0000**. +    - Send the following commands each in their own text message. If the device successfully received the command it will respond back.  
-        - **#​username,​0000,​9* **<​br/> ​This command resets the device to factory defaults. +\\ 
-        - **#​username,​0000,​3,​c1.korem2m.com,,​* **<​br/> ​This command sets the APN to c1.korem2m.com. Replace this with your own APN value.+The default username is **username**. 
 +\\ 
 +The default password is **0000**. 
 +        - **#​username,​0000,​9* ** 
 +\\ 
 +This command resets the device to factory defaults. 
 +        - **#​username,​0000,​3,​c1.korem2m.com,,​* ** 
 +\\ 
 +This command sets the APN to c1.korem2m.com. Replace this with your own APN value.
         - **#​username,​0000,​4,​ // http://​ct24.cygnustrack.com/​default.aspx // * **         - **#​username,​0000,​4,​ // http://​ct24.cygnustrack.com/​default.aspx // * **
 \\ \\
Line 29: Line 39:
         - **#​username,​0000,​6,​30,​9999***         - **#​username,​0000,​6,​30,​9999***
 \\ \\
-This command enabled Auto Track where the device will send out its location every 30 seconds. ​<br/>9999 means the device will send out messages any time it is turned on.+This command enabled Auto Track where the device will send out its location every 30 seconds. ​ 
 +\\ 
 +9999 means the device will send out messages any time it is turned on.
   -**Login to GPS Tracking Server**   -**Login to GPS Tracking Server**
     - Now we can login in to the GPS Tracking Server and add our tracking device to the system using the IMEI number we recorded in step 1. For further instructions on adding your device to the Map Suite GPS Tracking Server see the [[Map Suite GPS Tracking Server Web Portal Quick Start Guide]].     - Now we can login in to the GPS Tracking Server and add our tracking device to the system using the IMEI number we recorded in step 1. For further instructions on adding your device to the Map Suite GPS Tracking Server see the [[Map Suite GPS Tracking Server Web Portal Quick Start Guide]].
sanav_gc-101_configuration.1442455121.txt.gz · Last modified: 2015/09/17 01:58 by admin